Specifications | |
---|---|
10 inch Jobsite Saw PRO w/mobile cart and high/low fence system | |
Motor Configuration: | 120 VAC 60 Hz, Universal |
Amperage: | 15A |
Cord Length: | 116 inch |
Sold and Shipped as Full Set Only with Cart : | (no Cartless Option Available) |
Motor Continuous HP: | 1.5 HP |
Motor Peak HP: | 4 HP |
Saw Dimensions without Cart (Body only): | 31-3/4 W x 28-3/4 D x 15-1/2 H inch |
Saw Dimensions with Open Cart (ready to use): | 48 W x 29 D x 36 H inch |
Saw Dimensions with Closed Cart (on End/stored position): | 26-1/2 W x 29 D x 45 H inch |
Table Dimensions (Retracted): | 31-1/4 W x 24-5/8 D inch |
Table Dimensions (Extended): | 43-3/8 W x 24-5/8 D inch |
Shipping Dimensions: | 32 W x 43 D x 26 H inch |
Shipping Weight (with Cart): | 137 lbs |
Weight (Saw Only): | 84 lbs |
Weight (with Cart): | 113 lbs |
Blade Diameter: | 10 inch |
Dado Diameter: | 8 inch |
Dado Max. Width: | 13/16 inch |
Bevel Angle Range: | -1 to 46 |
Max. Depth of Cut, Blade at 0 deg: | 3-1/8 inch |
Max. Depth of Cut, Blade at 45 deg: | 2-1/8 inch |
Max. Rip Right of Blade (Extended): | 25-1/2 inch |
Max. Rip Left of Blade: | 9-3/4 inch |
Left | |
Arbor Diameter at Blade: | 5/8 inch |
Table in Front of Blade (Max Elev): | 7-7/8 inch |
Table Behind Blade (Max Elev): | 7-3/8 inch |
Miter Slots T-shaped Dimensions: | 0.754 W x .413 D; T .956 W x .157 THK inch |
Main Bearing Size: | 62mm OD x 30mm ID x 16mm W |
Second Bearing Size: | 52mm OD x 25mm ID x 15mm W |
Riving Knife/Splitter Thickness: | 2.3mm (.090 inch) |
Hand Wheel: | Effective diameter 6.3 inch |
Belts: | Poly-V static dissipative belt |
Table Flatness Measured Diagonally: | 0.033 inch Inches |
Dust Collection Port Diameter: | 2-9/16 inch Outside, 2-1/4 inch Inside |
Active Dust Collection Blade Guard: | polycarbonate, extends 1 inch right of blade |
Blade Guard (Dust Collection) Port Diameter: | 1-11/16 inch Outside, 1-3/8 inch Inside |